ZTW Seal G2 90A ESC 3-8S For RC Boat
We(ZTW) have released a new 32-bit version of the Seal 90A with new compact design, shorter, and narrower than its predecessor.
The SEAL G2 Series is designed specifically for RC Boat applications, featuring a waterproof design. The 90A ESC comes with built-in BEC, so you don't need an additional battery pack to operate the servo. In order to protect the boat, the ESC offers a power reduction when too hot and an optional Low Voltage Cutoff.
Key Features:
1. Adopting new generation craft on the MOSFET, low heat generation, withstand large current instantly, and high reliability.
2. Adopting high performance 32 bit microprocessor, the operation frenquency is up to 170MHz which makes the ESC stronger computing ability and faster running speed.
3. The waterproof design (rates as IP 67) allows this ESC to work in wet conditions, and it is equipped with metal water cooling to ensure efficient heat dissipation.
4. Super smooth start-up and accurate throttle linearity make the ESC suitable for various of applications such as, all kinds of RC boat models, electric surfboard and other underwater applications.
5. The SC has two running modes for different applications:“Forward Only” and “Forward and Backward”.
6. The ESC has freewheeling which makes the ESC with higher driving efficiency and more energy-saving.
7. Multiple protections: start-up, over-heat, low-voltage cutoff, signal loss, phase loss, over-current, abnormal power-on voltage, over-load protection.
8. Support high RPM motors, and compatible with most motors in the market.
9. Support programming via Phone App or LCD program card, easier and more convenient operation(Extra Bluetooth Module or LCD program card G2 needed.)
10. The ESC has data returning feature, it can send data in real-time: current, voltage, temperature, RPM, throttle and ESC status. And you can check the data via ZTW App or LCD program Box G2 in real-time.
| Model | Seal G2 90A 3-8S |
| Continuous Current(A) | 90 Amps |
| Burst Current(A) | 540 Amps |
| Voltage | 3-8S Lipo |
| Power Wire | 12 Gauge 88mm-Red/88mm-Black |
| Motor Wire | 12 Gauge 112mm-Black |
| BEC Output | 6V,7.4V, 8.4V Adjustable 8A |
| Size(not including wires) | 95mm*44mm*27mm(L*W*H) |
| Weight | 196g |
Este producto aún no tiene reseñas.
Let customers speak for us
ZTW Beast G2 120A ESC 2-4S Sensorless For 1/10th RC Car SCT
It looks great ESC i have allready on my heli and it works perfect.
ZTW Mantis G2 65A ESC 3-6S SBEC For RC Airplane EDF
I have had several ZTW ESC's and they have all worked flawlessly. Butter smooth throttle modulation and in my experience they can take high amp loads better that my equivalent Hobbywing and Traxxas Velineon ESCs could. The only negative is that there is no punch control and I hope they add this feature in future versions!
This 150A ESC is a MONSTER and I cannot wait to run it on 6s! It is sick on 3 and 4s.... I picked up a few mph over my 120A ESC.
great service!!! regarding communication, ordering and shipping. All of my questions were answered quickly and in a friendly manner. Shipping from China to Austria took exactly 7 days using the free shipping method. The ESC itself is a great piece, there's nothing more to say about it. I will definitely order directly from ZTW again if necessary. All I can say is “thank you” Best regards Wolfgang
Goods received. Everything went well. Could not be tested yet. Best regards
Great Company to work with
great bit of kit, looks really well made, quite heavy but i like that its i just adds that quality feel to it. shipped in about 4/5 days from china, cant complain.
it works great easy to build and to soft everything great too 700class heli
It is still before use, but the shipping is fast and good.
It is still before use, but the shipping is fast and good.
Arrived well, Skyhawk 160A HV ESC is used for 700 size helicopter.
Arrived well, LCD program card is mandatory for skyhawk ESC.