ZTW Skyhawk 160A ESC HV 6-14S SBEC For RC Helicopter
We(ZTW) have released a new 32-bit Skyhawk 160A ESC HV 6-14S built-in SBEC 6V/7.4V/8.4V 10A for RC airplane F3A F3C 550-700 helicopter.
Key Features:
1. Adopting high performance 32-bit M4 microprocessor with a running frequency of 170MHz, supported much stronger computing ability and faster running speed.
2. Adopting new generation craft on the MOSFET, low heat generation, large instantly withstand current, and high reliability.
3. Self-check function: after the ESC powered on, it will automatically check if have the power short circuit ,motor lose phase, throttle is not at zero position problem, and voltage range.
4. The special ESC case design and the unique fan guard structure greatly enhance the ESC heat dissipation performance.
5. There are two flight modes: fixed-wing mode and helicopter mode.
6. Equipped with the helicopter speed-control function, the speed sensitivity is adjustable and easy to operate.
7. Equipped with the time selection function for stall landing, it can be manually adjustable within the time set to avoid a crash due to handling errors.
8. The ESC has a separate programming interface to connect with LCD programming card or Bluetooth module for programming.
9. Supporting data returning function: current, voltage, temperature, RPM, throttle and ESC status code.
10. Bluetooth module supported, change the parameter settings, software upgrading, data recording and the operation can be completed via the mobile phone (Apple and Android) APP.
11. Multiple protections: abnormal power-on voltage protection, start up protection, temperature protection,throttle signal loss protection, over load protection,low voltage protection, over current protection.
| Model | Skyhawk 160A HV 6-14S SBEC |
| Continuous Current(A) | 160 Amps |
| Burst Current(A) | 180 Amps |
| Voltage | 6-14S LiPo |
| Power Wire | 10 Gauge 160mm-Red/160mm-Black |
| Motor Wire | 10 Gauge 160mm-Black |
| BEC Output | 6V/7.4V/8.4V Adjustable 10A |
| Size(not including wires) | 95*50*36mm(L*W*H) |
| Weight | 236g |
| Firmware Upgrade | Supported |
This product is rated 5.0 of 5.0 stars.
It has received 9 reviews.
Let customers speak for us
I have had several ZTW ESC's and they have all worked flawlessly. Butter smooth throttle modulation and in my experience they can take high amp loads better that my equivalent Hobbywing and Traxxas Velineon ESCs could. The only negative is that there is no punch control and I hope they add this feature in future versions!
This 150A ESC is a MONSTER and I cannot wait to run it on 6s! It is sick on 3 and 4s.... I picked up a few mph over my 120A ESC.
great service!!! regarding communication, ordering and shipping. All of my questions were answered quickly and in a friendly manner. Shipping from China to Austria took exactly 7 days using the free shipping method. The ESC itself is a great piece, there's nothing more to say about it. I will definitely order directly from ZTW again if necessary. All I can say is “thank you” Best regards Wolfgang
Goods received. Everything went well. Could not be tested yet. Best regards
Great Company to work with
great bit of kit, looks really well made, quite heavy but i like that its i just adds that quality feel to it. shipped in about 4/5 days from china, cant complain.
it works great easy to build and to soft everything great too 700class heli
It is still before use, but the shipping is fast and good.
It is still before use, but the shipping is fast and good.
Arrived well, Skyhawk 160A HV ESC is used for 700 size helicopter.
Arrived well, LCD program card is mandatory for skyhawk ESC.
It works well for 700 size rc helicopter.
Good to use for Goblin raw 700 Piuma.
ZTW Skyhawk 160A ESC HV 6-14S SBEC For RC Helicopter
the combo is worth every penny,the best budget combo ever!
I've put it in my arrma typhon mega and that made it a lot more fun and lively!
highly recommended!